This is a good chair for the price, comfy and sturdy. Some are commenting on the holes not being aligned for assembly. At least from my experience, the holes are aligned but the fake wicker covering may not be 100 percent. So the frame is metal wrapped in fake wicker which is a strong plastic. The holes in the metal frame are well aligned but the openings in the plastic were not. Aligning the pieces and putting the allen wrench through first can give you an easy way to widen the hole if needed before putting in the screw. If you go through first with the screw, it is really difficult to penetrate any overlaying plastic wicker wrap.
Once the halves of the seat are together there are 4 screws connecting it to the base. Here also people are saying the holes dont line up. If you put all 4 screws in place before tightening then its fine. If you tighten down one screw fully before moving to the next position it will be pulled off center. Also use the washers provided for this product so that your connections are stable.
So there is a little extra thought in the process of putting it together but it is good quality overall. I put it together in about 20 min and now have a comfy reading corner. The spinning of the chair is nice too. Rocking back and forth a little is similar to a rocking chair.
Good value comfy chair
This is a good chair for the price, comfy and sturdy. Some are commenting on the holes not being aligned for assembly. At least from my experience, the holes are aligned but the fake wicker covering may not be 100 percent. So the frame is metal wrapped in fake wicker which is a strong plastic. The holes in the metal frame are well aligned but the openings in the plastic were not. Aligning the pieces and putting the allen wrench through first can give you an easy way to widen the hole if needed before putting in the screw. If you go through first with the screw, it is really difficult to penetrate any overlaying plastic wicker wrap. Once the halves of the seat are together there are 4 screws connecting it to the base. Here also people are saying the holes dont line up. If you put all 4 screws in place before tightening then its fine. If you tighten down one screw fully before moving to the next position it will be pulled off center. Also use the washers provided for this product so that your connections are stable. So there is a little extra thought in the process of putting it together but it is good quality overall. I put it together in about 20 min and now have a comfy reading corner. The spinning of the chair is nice too. Rocking back and forth a little is similar to a rocking chair.