I was very pleasantly surprised with this cabinet. It looks really good and while it took me a couple of hours to assemble it the instructions were very clear and very well written. The most amazing part - when coming to the final big assembly - all the pegs, and bolts and cardboard backing lined up and I was so surprised I had to check it over a couple of times to make sure. The only tool needed is a Philips (star) screwdriver - I had a ratcheting one which save a lot of time and effort as there are a lot of things to screw in this. Of note - the bottoms of the drawers are a heavy cardboard (not wood or MDF) and I am interested to see how they hold up. My lesson learned - pay close attention to the instructions when mounting the rails to the drawer. I reversed the side panels on the filing drawer and because I did not follow the instructions the drawer would not close completely. I disassembled the drawer, mounted the rails properly, reassembled the drawer and it closed correctly. As I mentioned before it took me a couple of hours to assemble and save your wrist and get a ratcheting Philips screw driver. I highly recommend this printer stand / filing cabinet. If the color you are looking for is out on - go to their website and buy it there.
Great Cabinet, Great Instructions and Great Fit
I was very pleasantly surprised with this cabinet. It looks really good and while it took me a couple of hours to assemble it the instructions were very clear and very well written. The most amazing part - when coming to the final big assembly - all the pegs, and bolts and cardboard backing lined up and I was so surprised I had to check it over a couple of times to make sure. The only tool needed is a Philips (star) screwdriver - I had a ratcheting one which save a lot of time and effort as there are a lot of things to screw in this. Of note - the bottoms of the drawers are a heavy cardboard (not wood or MDF) and I am interested to see how they hold up. My lesson learned - pay close attention to the instructions when mounting the rails to the drawer. I reversed the side panels on the filing drawer and because I did not follow the instructions the drawer would not close completely. I disassembled the drawer, mounted the rails properly, reassembled the drawer and it closed correctly. As I mentioned before it took me a couple of hours to assemble and save your wrist and get a ratcheting Philips screw driver. I highly recommend this printer stand / filing cabinet. If the color you are looking for is out on - go to their website and buy it there.