First off let me say, this showed up almost a week sooner than predicted so that was nice. There were no missing parts, but it also did not provide any tools to help with assembly like most furniture does, so be sure you have a screwdriver and some wood glue for the dowels.
The dimensions appear to be accurate and the lights work with no fuss.
For how small this furniture is I was jarringly surprised at how many pieces there are to put together. It took me the better part of 4 hours to do both pictured above, and I literally make furniture as a hobby.
Be very careful as the material chips easily. I suspect it will not survive multiple moves just based on scratches and chips that were present upon arrival, and also ones that were added from casually handling the product. It likely will be fine if it is in a stress free (no chewing pets or rowdy kids etc) environment and am giving it a rating based on that.
The instructions could be a little bit clearer on how to attach the rollers. My first attempt at how I thought it was displayed resulted in the drawers not fitting, but I literally just flipped them and it was fine, a minor complaint.
The led connection is a little bit sketchy from my experience as the power supply remote control broadcaster and actual led are all separate pieces, lots of points of failure in the future. The power cable is also quite short, so be sure you are placing this near an outlet.
Overall there are not a lot of side/end tables designed like this with leds so I guess the price is ok, thought I am not fond of paying 150 a pop for particle board. If there were a similarly priced alternative I may have gone with them instead.
This thing is a bugger to put together
First off let me say, this showed up almost a week sooner than predicted so that was nice. There were no missing parts, but it also did not provide any tools to help with assembly like most furniture does, so be sure you have a screwdriver and some wood glue for the dowels. The dimensions appear to be accurate and the lights work with no fuss. For how small this furniture is I was jarringly surprised at how many pieces there are to put together. It took me the better part of 4 hours to do both pictured above, and I literally make furniture as a hobby. Be very careful as the material chips easily. I suspect it will not survive multiple moves just based on scratches and chips that were present upon arrival, and also ones that were added from casually handling the product. It likely will be fine if it is in a stress free (no chewing pets or rowdy kids etc) environment and am giving it a rating based on that. The instructions could be a little bit clearer on how to attach the rollers. My first attempt at how I thought it was displayed resulted in the drawers not fitting, but I literally just flipped them and it was fine, a minor complaint. The led connection is a little bit sketchy from my experience as the power supply remote control broadcaster and actual led are all separate pieces, lots of points of failure in the future. The power cable is also quite short, so be sure you are placing this near an outlet. Overall there are not a lot of side/end tables designed like this with leds so I guess the price is ok, thought I am not fond of paying 150 a pop for particle board. If there were a similarly priced alternative I may have gone with them instead.