Easy to assemble took about 30 mins maybe 45 to put together. The color is nice, chairs look like photo. They arent the most comfortable but eh itll do. The bottom taps that come on the chairs are uneven so the chairs rock a bit. But nothing to cry over. Shipping was quick. Id recommend, I also shared some pics. Good luck with your decision.
We like the clean white of the stools, and the ability to change the height by the pneumatic lever.
The assembly was super easy, except that I assembled the lower bar (foot rest) facing the back. 1 minute later all corrected. One just inserts the cylinder and sits down. All the holes fit, no burrs, no scratches or uneven paint. Well worth the price. The material has a velvety feel, and one can sit comfortably for a longer period without getting to the discomfort phase.
The rotate very well, and if there is something to note, when being raised, they move in few steps, not a smooth move from lowest to highest. Nothing bad functional, but I mention to set expectations.
As with most cylinders (in chairs) once you sit on, it drops a bit. See pictures.
These stools came very well packed and all the pieces were in great shape. Each took about 2 minutes to assemble -after- getting them unpacked. It probably took longer to free the parts from all the protective packaging than it did to assemble the stools. The fit and finish are good and they're as comfortable as any other decent bar stool. Note: I've never sat in a bar stool and thought Nice!.
The only possible negative is that each stool came with one extra bolt and it took a moment to confirm that the fifth bolt was extra. The stools came with a pair of thin cloth gloves that actually came in handy because I got a little grease from the hydraulic thing (for adjusting height) on a hand and it was making smear marks that were a pain to rub clean. No more smear marks after putting on the gloves.
These stools are a little bouncy when I plop my 195 lb self down or pop the height adjust lever and drop the seat down a few inches.. The bounces damp out quickly.
There are four simple parts: a base, gas cylinder, footrest, and seat. You place the gas cylinder in the base. Then you bolt the footrest section to the base of the seat. Finally, you place the upper portion on the stem of the gas cylinder, and you're done. There are only four bolts to deal with (footrest to seat). You get one extra bolt per seat in case you lose one. Assembly is that simple and stress-free.
Once assembled, it is as good as it looks. The base is stable, it goes up and down easily, the seat is comfortable, and it's nice to rest your feet on the footrest.
They are simple, functional, and look good in any decor.
Honestly, I wasnt expecting much from some plastic and metal chairs, but these are pretty decent! All you have to do is screw the pole into the base of the chair, make sure to pop the cap off the air compressor thing, and click it into the base. Very straightforward. The only thing I will say is theyre a tad wobbly if you raise them all the way up, but I imagine most people will keep them at table or bar height.
I had these together in 15 minutes. About 1/2 the dunnage is cardboard, the other half is plastic bags and foam sheets. No damage to any of the flat black, painted surfaces.
All of the hardware (5 of the 4 screws you need, plus a hex wrench) is blister packed and tied to the box so you dont accidentally throw it away.
Swivel function is infinite and smooth. The gas strut is easy to adjust and has a nice squish to it. The stool is pretty comfy, the foot rest is nicely welded, and the disc base has enough give in the perimeter rubber ant-slip ring to deal with imperfect tile floors without rocking.
If you like the style, this is a good value and easy to assemble.
The chair is a gift for my friend. Compared with other brands, this barstools' packaging is small, it's literally a square. The size can easily fit in the trunk. The installation is easy, and the style looks great. My friends like it very much, and I will choose this one if I want to buy it in the future!
die beiden Barhocker von sind einfach zu montieren. Die Verarbeitungsqualität aller Einzelteile ist gut. Nach dem Aufbau sehen die Hocker super aus uns sind für den doch sehr günstigen Preis auch überraschend robust und stabil. Jeder Hocker bringt knapp 7kg auf die Waage.
Zudem zeigt sich das Design und Funktion sich nicht gegenseitig ausschließen müssen. Denn es sitzt sich sehr bequem auf den Barhockern. Dazu trägt auch die Fußstütze bei.
Da die Hocker in weiß gehalten sind wirken sie besonders stilvoll. Sie lassen sich auch gut reinigen.
Fazit: zwei sehr schöne Barocker zum moderaten Preis.
Reviews
Nice
Easy to assemble took about 30 mins maybe 45 to put together. The color is nice, chairs look like photo. They arent the most comfortable but eh itll do. The bottom taps that come on the chairs are uneven so the chairs rock a bit. But nothing to cry over. Shipping was quick. Id recommend, I also shared some pics. Good luck with your decision.
Eye candy, fitting well in the room
We like the clean white of the stools, and the ability to change the height by the pneumatic lever. The assembly was super easy, except that I assembled the lower bar (foot rest) facing the back. 1 minute later all corrected. One just inserts the cylinder and sits down. All the holes fit, no burrs, no scratches or uneven paint. Well worth the price. The material has a velvety feel, and one can sit comfortably for a longer period without getting to the discomfort phase. The rotate very well, and if there is something to note, when being raised, they move in few steps, not a smooth move from lowest to highest. Nothing bad functional, but I mention to set expectations. As with most cylinders (in chairs) once you sit on, it drops a bit. See pictures.
Easy to assemble, look good, good materials and build quality.
These stools came very well packed and all the pieces were in great shape. Each took about 2 minutes to assemble -after- getting them unpacked. It probably took longer to free the parts from all the protective packaging than it did to assemble the stools. The fit and finish are good and they're as comfortable as any other decent bar stool. Note: I've never sat in a bar stool and thought Nice!. The only possible negative is that each stool came with one extra bolt and it took a moment to confirm that the fifth bolt was extra. The stools came with a pair of thin cloth gloves that actually came in handy because I got a little grease from the hydraulic thing (for adjusting height) on a hand and it was making smear marks that were a pain to rub clean. No more smear marks after putting on the gloves. These stools are a little bouncy when I plop my 195 lb self down or pop the height adjust lever and drop the seat down a few inches.. The bounces damp out quickly.
Great!
There are four simple parts: a base, gas cylinder, footrest, and seat. You place the gas cylinder in the base. Then you bolt the footrest section to the base of the seat. Finally, you place the upper portion on the stem of the gas cylinder, and you're done. There are only four bolts to deal with (footrest to seat). You get one extra bolt per seat in case you lose one. Assembly is that simple and stress-free. Once assembled, it is as good as it looks. The base is stable, it goes up and down easily, the seat is comfortable, and it's nice to rest your feet on the footrest. They are simple, functional, and look good in any decor.
Very easy to put together
Love love love! I may order two more. I put it together in less than 10mins and they are great quality
Easy assembly, pretty comfy!
Honestly, I wasnt expecting much from some plastic and metal chairs, but these are pretty decent! All you have to do is screw the pole into the base of the chair, make sure to pop the cap off the air compressor thing, and click it into the base. Very straightforward. The only thing I will say is theyre a tad wobbly if you raise them all the way up, but I imagine most people will keep them at table or bar height.
Two per box, four screws per stool, seems solid.
I had these together in 15 minutes. About 1/2 the dunnage is cardboard, the other half is plastic bags and foam sheets. No damage to any of the flat black, painted surfaces. All of the hardware (5 of the 4 screws you need, plus a hex wrench) is blister packed and tied to the box so you dont accidentally throw it away. Swivel function is infinite and smooth. The gas strut is easy to adjust and has a nice squish to it. The stool is pretty comfy, the foot rest is nicely welded, and the disc base has enough give in the perimeter rubber ant-slip ring to deal with imperfect tile floors without rocking. If you like the style, this is a good value and easy to assemble.
Most efficient and well made product!
Very easy to assemble!
Good one!
The chair is a gift for my friend. Compared with other brands, this barstools' packaging is small, it's literally a square. The size can easily fit in the trunk. The installation is easy, and the style looks great. My friends like it very much, and I will choose this one if I want to buy it in the future!
tolles Design in stilvollem weiß
die beiden Barhocker von sind einfach zu montieren. Die Verarbeitungsqualität aller Einzelteile ist gut. Nach dem Aufbau sehen die Hocker super aus uns sind für den doch sehr günstigen Preis auch überraschend robust und stabil. Jeder Hocker bringt knapp 7kg auf die Waage. Zudem zeigt sich das Design und Funktion sich nicht gegenseitig ausschließen müssen. Denn es sitzt sich sehr bequem auf den Barhockern. Dazu trägt auch die Fußstütze bei. Da die Hocker in weiß gehalten sind wirken sie besonders stilvoll. Sie lassen sich auch gut reinigen. Fazit: zwei sehr schöne Barocker zum moderaten Preis.
Add a review