Wasnt too hard to put together. Feels pretty sturdy but drawers are a little thin. Fine to hold extra linens/guest room but dont think it would hold up to a lot of everyday use or in a kids room
The weight of the box was very impressive. It is heavy material for particle board. This will be a nice Dresser for the space I have available and the price is right but there are a couple of issues to iron out first.
One of the drawer fronts is damaged and Ive had to send for a replacement part. That is of course if the company sends it to me.
The second issue is that I am one of those people who actually reads instructions and looks at those pictures. Many previous reviews complain of there only being pictures to go by. WELL, I dont have any instructions. Not even the pictures and that would have been very handy in deed.
Im going to have to guess on the steps necessary and hope I dont have to undo whatever I do. Particle board doesnt take kindly to repeated use of the same screw holes.
UPDATE: I filed a missing part claim with and they are sending out the broken drawer front. Super fast response, really easily to submit and itll be sent within 24 hours. THey also sent me an emailed copy of the instructions today (less than 8 hour response time). Id have to say theyve gone the distance to make the customer happy.
I am very satisfied with the customer service they provide. And I think once I get this dresser assembled Ill like it as well. Hope this helps everyone who is concerned about the service you recieve in the event something does get damaged in shipment.
THANK YOU
Unlike some here, ours arrived in perfect condition. There were no broken parts, no scratches, no dings, no short parts, everything just right and perfect. Packaging was designed to take a bit of rough handling, but a drop on a corner would have, of course, made the entire 89 package unusable; it is not chimp proof. It is aming how CNC has created such a package where all the parts fit perfectly with each other. For assembly, I started using Titebond III, putting a drop or two in the holes where inserts were dropped or screwed in. The glue will strengthen the local fibers. Also used on drawer ends for the butt assembly; it is good cabinet practice not to glue the drawer floor, however / let it float. Yes, they could do a few things differently / like mark the side panels as to which is UP and which is Right and Left, and indicate in the Instructions which direction the polymer coated side is to go for the base and the upper cross reinforcing block. Look at the Instructions and your parts several times before proceeding. For the drawer sides, I did all the Right together and Left together, making sure I had the bottom groove positioned correctly and was going from the correct end to mount the rails. Only one problem: when I attached one of the drawer fronts, one of the small zinc cams bent and failed. Would have been nice to have had a spare large/small cam. Especially if you use Titebond III for assembly, the resulting structure is quite sturdy. The drawers have this solid feel as they easily roll in and out. And No, they do not fall out when you pull / you have to lift up the front of the drawer to remove drawer. With all the fine lumber in British Columbia, one would like to have had solid wood drawer fronts, side styles, and top / could be done with minimal extra expense. Too bad this is not available at any local furniture stores / you could save at least 80 on the UPS shipping, pricing it just right then.
I was so thrilled to get the chest of drawers, the chest of drawers was actually larger than I pictured. It was easy to put together, you just have to take you time and refer to the diagrams or you could mess up. The drawers are extra roomy and they glide so nicely. I had one little nic and crack on the drawer front. I notified the company and received a replacement with out any problems. Item was packaged very well and chest of drawers are heavy and well made.
If you cannot intuitively put anything together without frustration, be warned that the instructions are visual and the parts are not labeled. While not solid wood, this is a solid and affordable storage solution.
Reviews
Perfect size
Very nice heavy piece
Great piece of furniture!
Beautiful piece of furniture and very sturdy. Fairly easy to assemble and nice wood and color.
Not a long term fix
Wasnt too hard to put together. Feels pretty sturdy but drawers are a little thin. Fine to hold extra linens/guest room but dont think it would hold up to a lot of everyday use or in a kids room
Impressed then Disappointed then.Impressed again!
The weight of the box was very impressive. It is heavy material for particle board. This will be a nice Dresser for the space I have available and the price is right but there are a couple of issues to iron out first. One of the drawer fronts is damaged and Ive had to send for a replacement part. That is of course if the company sends it to me. The second issue is that I am one of those people who actually reads instructions and looks at those pictures. Many previous reviews complain of there only being pictures to go by. WELL, I dont have any instructions. Not even the pictures and that would have been very handy in deed. Im going to have to guess on the steps necessary and hope I dont have to undo whatever I do. Particle board doesnt take kindly to repeated use of the same screw holes. UPDATE: I filed a missing part claim with and they are sending out the broken drawer front. Super fast response, really easily to submit and itll be sent within 24 hours. THey also sent me an emailed copy of the instructions today (less than 8 hour response time). Id have to say theyve gone the distance to make the customer happy. I am very satisfied with the customer service they provide. And I think once I get this dresser assembled Ill like it as well. Hope this helps everyone who is concerned about the service you recieve in the event something does get damaged in shipment. THANK YOU
Arrived in Perfect Condition / Solid Product
Unlike some here, ours arrived in perfect condition. There were no broken parts, no scratches, no dings, no short parts, everything just right and perfect. Packaging was designed to take a bit of rough handling, but a drop on a corner would have, of course, made the entire 89 package unusable; it is not chimp proof. It is aming how CNC has created such a package where all the parts fit perfectly with each other. For assembly, I started using Titebond III, putting a drop or two in the holes where inserts were dropped or screwed in. The glue will strengthen the local fibers. Also used on drawer ends for the butt assembly; it is good cabinet practice not to glue the drawer floor, however / let it float. Yes, they could do a few things differently / like mark the side panels as to which is UP and which is Right and Left, and indicate in the Instructions which direction the polymer coated side is to go for the base and the upper cross reinforcing block. Look at the Instructions and your parts several times before proceeding. For the drawer sides, I did all the Right together and Left together, making sure I had the bottom groove positioned correctly and was going from the correct end to mount the rails. Only one problem: when I attached one of the drawer fronts, one of the small zinc cams bent and failed. Would have been nice to have had a spare large/small cam. Especially if you use Titebond III for assembly, the resulting structure is quite sturdy. The drawers have this solid feel as they easily roll in and out. And No, they do not fall out when you pull / you have to lift up the front of the drawer to remove drawer. With all the fine lumber in British Columbia, one would like to have had solid wood drawer fronts, side styles, and top / could be done with minimal extra expense. Too bad this is not available at any local furniture stores / you could save at least 80 on the UPS shipping, pricing it just right then.
Great value
Took me one night to assemble by myself. Its held up so far! No complaints.
Love this company!
I was so thrilled to get the chest of drawers, the chest of drawers was actually larger than I pictured. It was easy to put together, you just have to take you time and refer to the diagrams or you could mess up. The drawers are extra roomy and they glide so nicely. I had one little nic and crack on the drawer front. I notified the company and received a replacement with out any problems. Item was packaged very well and chest of drawers are heavy and well made.
Very nice and streamlined for the price !
Perfect size for where I wanted it. It does take a few hours for one person to put together but it is very nice for the price!
Fine for the price
If you cannot intuitively put anything together without frustration, be warned that the instructions are visual and the parts are not labeled. While not solid wood, this is a solid and affordable storage solution.
Very nice looking
Very nice looking
Add a review